CA-CFR-PS-DB9P Product Description
This cable connects the 5-pin J1 connector of a T7 Networked Absolute Inclinometer (RS232 interface) to a standard PC's DB9 RS-232 serial COM port. The power connector is used to supply 5.5V to 30V power to the T7. This allows the host computer to read the position and set parameters of the T7-232 via the COM port.
WARNING: This product can cause exposure to substances, such as phthalate plasticizers, known to the State of California to cause cancer and reproductive harm. For more information, go to oehha.ca.gov/proposition-65.
Product Specifications
PIN-OUT
| T7 (J1 CONNECTOR) |
DB9 |
POWER JACK |
| Pin 1 (Shield) |
- |
- |
| Pin 2 (VIN) |
- |
Center terminal |
| Pin 3 (GND) |
Pin 5 (GND) |
Outer sheath |
| Pin 4 (TXD) |
Pin 2 (RX) |
- |
| Pin 5 (RXD) |
Pin 3 (TX) |
- |
Additional Information
Product Notes
-
US Digital® warrants its products against defects in materials and workmanship for two years. See complete warranty for details.
Datasheets
Product Configurator
Our products are not currently available for direct online purchase. To place an order please contact us directly with your part number.
For purchasing or volume discounts, please configure the part above, then use the completed part number and contact us!
Feedback
US Digital's mission is a commitment to quality and constant improvement. If you find an error to a product on this page, please let us know!
